Manfrotto Transfer is a Ridiculously Good Concept and a Workflow Marvel

Manfrotto’s Move system felt like a good suggestion once I first noticed it in October: one small puck would play host to a quick-release system that makes it simple to swap tripod heads, legs, and extra. After testing, it’s even higher than I anticipated and I can’t consider it took somebody this lengthy to make a product that has been an absolute boon for on-set workflow.

Manfrotto sponsored this Showcase in order that we might check out the Transfer ecosystem, and whereas every thing on this story is made by Manfrotto, the fantastic thing about the Transfer gadget itself is that it may well match into any present system seamlessly with full compatibility because of a common 3/8-inch thread connector and 1/4-inch thread adapter, permitting you to circulation immediately between present setups.

Designed across the thought of pace and flexibility, the Transfer system was made by Manfrotto to make it simpler for a hybrid photographer/videographer to adapt to the altering wants on set. Pitched as a solution to shortly transfer from several types of tripods, sliders, gimbals, and different stabilization equipment, the Transfer is a tiny puck and fast launch system that lives between any two factors that want the power to simply swap between each other.

Design and Construct High quality

Beneath is the Transfer:

The Transfer catcher on the left, adopted by the 2 plate choices within the center (for the Gimboom and legs mixture) and proper (for normal system makes use of).

As you possibly can see, it’s not a very massive gadget. It’s solely 2.36-inches vast by 1.18-inches tall and weighs a scant 220 grams (7.8 ounces). It’s made totally of steel (particularly, machined aluminum mixed with arduous anodizing for high-durability), so it’s sturdy and powerful sufficient to deal with the pains of repeated use on set, the place tripods and different stabilization equipment usually take a beating.

The Manfrotto Transfer is ingenious in its simplicity. The bigger “catcher,” which I wish to name the puck, screws into place on the bottom of a tripod, on a slider, or on a monopod and growth. The short-release plate can then screw into place on the bottom of a tripod head, on the underside of a slider, onto the underside of a timelapse machine like a Syrp Genie, and even on the bottom of a gimbal. Principally, if it accepts a 3/8″-16 screw, the puck can connect to it (it comes with a 1/4″-20 adapter screw as properly) and the plate suits on something that takes 1/4″-20. The system is ready to help a payload of 44 kilos, which is far more than most will want.

The system works like a attraction. To connect any plate-equipped gadget, simply drop it within the catcher and it routinely locks into place. You possibly can screw the catcher closed to additional lock it, however this was usually not required. The identical dial may be twisted within the different route to launch any plate into the Fast Launch system, and that pops it up out of the catcher shortly.

Not solely does it work reliably, however the clicking motion of locking a plate into place and the twisting motion of popping that plate again out is extremely satisfying.

After I ran my manufacturing firm in San Francisco, we might frequently be tasked with capturing video footage, timelapses, and images for jobs. That will imply a number of cameras, tripods, and plates that wanted to constantly get swapped and moved round, and it additionally meant we had numerous redundant elements. I had two or three fluid heads per shoot, for instance, as a result of I wanted two on tripods for interviews and one other on a slider for B-roll. On prime of that, we might use the identical slider to seize timelase footage, which meant we might be screwing and unscrewing heads from the identical slider a number of instances in the identical day.

If that sounds complicated, it’s as a result of it was, and it was a significant ache to do all of this and ensure we didn’t overlook to screw one thing tightly into place — which undoubtedly occurred on a number of events.

If I had the Transfer again then, I might be capable to dramatically simplify my workflow. Putting one seize puck on the slider would enable me to swap heads simply. I might use a ball head for my photograph digicam after which shortly and simply swap to the fluid head for video.

Certainly one of my favourite functions of the Transfer is with a gimbal. Manfrotto just lately launched what it calls the Gimboom, which is a thick monopod growth arm designed to carry the load of a digicam and a gimbal and go from floor degree to an overhead place shortly, including further versatility and suppleness with its Gimbal. This allows you to get distinctive, larger angles than you’d be capable to beforehand.

Pulling the Gimbal off a Transfer QR system catcher hooked up to a tripod.

With a catcher on each the top of the Gimboom and on a set of tripod legs, I might pop the gimbal off from the resting place on a tripod and onto the growth to instantly get these angles. When completed, I might simply set the gimbal again on the tripod the place it could be up and out of the way in which. Whereas Manfrotto’s gimbal and others in the marketplace ship with their very own collapsible ft, the Transfer feels lots safer. As an alternative of getting to set the gimbal on a desk or on the bottom (which is, let’s be sincere, actually frequent), it may well as a substitute sit safely at eye degree on the highest of a tripod.

Manfrotto Gimbal hooked up to the Gimboom through the Transfer QR.
The Gimbal controller attaches to the underside of the growth and wirelessly controls the Gimbal that’s hooked up to the opposite finish.

Might you do that earlier than? Completely. Was it practically as quick and simple to get it on and off the tripod? Nope. The Transfer simply makes every thing a lot simpler.

It is usually value noting that Manfrotto’s modular gimbal permits you to detach the deal with from the pinnacle and use it as a distant management that, because of its good integration with the Transfer, permits you to arrange and use it in further, helpful methods a lot sooner and extra simply.

One factor that I used to be involved about was if the plate would rotate whereas contained in the catcher and make it troublesome to inform if I used to be utilizing a fluid head or simply rotating freely in it. Fortunately, the catcher holds the plate securely, and when you can flip it contained in the catcher, it’s a must to give it a big power to take action. When you do the secondary lockdown twist, nonetheless, it doesn’t transfer in any respect. Manfrotto says the Transfer is supported by an “Xlock” function that will increase the rigidity of all the system when mounted and says that it’s not only a easy accent however one thing that may enhance the efficiency of all the equipment. I can’t discover any purpose to not consider them.

The opposite concern some may need is a matter my mates and I used to name “totem poling,” which is when gear will get too tall on prime of a tripod or slider which may make it prone to transferring within the wind. The addition of the peak from one Transfer unit isn’t sufficient to trigger this to occur in my view, however stacking two or extra in a single system may trigger this problem to come up. Fortunately, the Transfer is de facto sturdy so it doesn’t wish to flex a lot even in case you get a bit tall.

The place Has This Been All My Life?

Typically it’s a disgrace that tales like this are sponsored as a result of it would undermine the actual opinions about how good one thing is. I hope that isn’t the case for you studying this, as a result of the Transfer is legitimately one of the crucial helpful and downright revolutionary instruments I’ve come throughout from an on-set workflow standpoint. The Transfer was our PetaPixel Photography Accessory of the Year for a purpose.

If I nonetheless ran my manufacturing firm, I might purchase 10 of those and put them on each tripod, slider, jib, timelapse machine, and gimbal I owned. I completely love how simple the Transfer makes it to transition between equipment and it could have saved a lot effort and time on set to greater than cowl the $100 cost of entry.

For extra examples of the Transfer in several use instances, make sure that to take a look at our coverage from October.

Welcome to a PetaPixel Showcase, wherein our employees provides you a hands-on with distinctive and fascinating merchandise from throughout the images panorama. The Showcase format affords producers the chance to sponsor hands-on time with their merchandise and our employees, and it lets them spotlight what options they assume are value noting, however the opinions expressed from PetaPixel employees are real. Showcases shouldn’t be thought-about an endorsement by PetaPixel.

Go to Source

Leave a Comment

Your email address will not be published. Required fields are marked *