The Five Most Essential Camera Settings and How to Use Them

The post The Five Most Essential Camera Settings and How to Use Them appeared first on Digital Photography School. It was authored by David Shaw.

Modern cameras, from smartphones to high-end DSLRs, are designed to make decisions for us.

And, for the most part, they do a pretty good job. Slap your DSLR into Auto mode, and more often than not you’ll get images that are sharp with a decent exposure.

camera settings, what they mean, and how they’ll impact your photos.

ISO

Here’s the first essential camera setting you should know:

ISO.

Now, the acronym “ISO” is terrible, because it’s basically meaningless in terms of photography. It stands for International Organization for Standardization, a European non-governmental organization that makes sure industries apply the same standards.

In the case of photography, the International Organization for Standardization wanted to make sure that an 800 ISO on a Canon camera is the same as on a Nikon, Sony, or a Fuji. If that standard didn’t exist, then settings wouldn’t be applicable across camera brands. So if I set my Canon to make an image at 1/100s at f/2.8 and ISO 400, and you set your Nikon to the same settings, we wouldn’t get the same exposure.

Thankfully, all the major manufacturers do subscribe to the ISO standard.

So what is ISO?

ISO is the measure of the sensitivity of your camera’s digital sensor to light. The lower the number, the lower the sensitivity; the higher the number, the more sensitive the sensor becomes.

Say that you’re shooting in a low light situation, such as in a poorly-lit room or on a dusky evening. An ISO setting of 100 will require that more light reaches the sensor than if you were to use a setting of ISO 400, 800, or 1600.

digital noise in the image (though camera sensors are getting better and better at avoiding this).
  • Sometimes you may want to force a slow shutter speed, in which case you need less sensitivity to light. This may be the case if you are trying to capture blurred motion such as water or wind, or if you’re creating pleasing blurs in sports photography.
  • the shutter speed.

    Many cameras have a mechanical shutter that snaps open and closed, allowing light to reach the sensor. Others use a digital shutter that simply turns on the sensor for a set period of time before switching it off again.

    Your shutter speed has a huge impact on the final image.

    Why?

    Because a long shutter speed will create blur in moving subjects. As a landscape photographer, I use long shutter speeds to blur water, capture starlight, or show wind motion.

    aperture, or f-stop, might be the most confusing aspect of photography for many photographers. This is because it affects images in unexpected ways.

    Essentially, the aperture is how big the hole in the lens is. The smaller the hole, the less light that is allowed in; the larger the hole, the more light that gets through.

    What often confuses people is the numbering system:

    The smaller the number, the larger the hole.

    So a setting of f/2.8 corresponds to a larger opening than f/4, f/5.6, f/8, f/11, and so on. Lenses with a wide maximum aperture (i.e., a small number like f/2) are considered fast, meaning that they are capable of allowing in more light.

    But it’s not just about light and how wide a lens can open. The aperture also affects image sharpness.

    You see, most, if not all, lenses are sharper a few f-stops down (called the sweet spot). A lens with a maximum aperture of f/2.8 will create a sharper image at f/8 than at f/2.8. The better the lens, the less this matters, but it is noticeable on most lenses.

    Depth of field and its applications

    The aperture also controls the depth of field.

    The depth of field is the amount of the image from close to far that is in focus. A lens set to its widest aperture (say f/2.8) will give less depth of field than the same lens set to f/11.

    White balance, like ISO, relates to the sensor.

    But, in this case, it has to do with the color of the light, rather than its brightness.

    Different light sources have different color tones. Our eyes often don’t detect these differences, but you can bet your camera will. Have you ever seen a photo of a home interior lit by soft white bulbs, but including a window? Usually, the interior of the room looks natural while the outdoor light looks artificially blue.

    That’s white balance. The camera (or photographer) decided to use the interior light (the warm-toned bulbs) as the neutral color, but then the natural light outdoors shifted toward blue.

    Now, when the white balance is set wrong, the colors are off. They look too yellow, blue, or orange.

    But when the white balance is correct, everything looks natural, as our eyes detect it.

    Auto White Balance setting on my camera. Cameras are pretty darn good at assessing color tones and deciding on the appropriate white balance. When my camera does get it wrong, I can check the image on the LCD and make the correction for the next shot.

    Also, I shoot exclusively in RAW format, which means that I can make adjustments to the white balance during post-processing. I trust the image on my computer screen more than I trust the tiny LCD on the back of my camera.

    That said, there are times you should adjust the camera’s white balance setting. The first is if you are shooting JPEGs. The JPEG file format will not allow you to effectively adjust the white balance later, so you must get it right in-camera.

    The second time you’ll want to adjust your white balance setting is when stacking images, either for high-contrast scenes or for panoramas. When stacking, slight changes in color tones will make combining several images into a single HDR photo or a panorama much more difficult or even impossible.

    You can also adjust your white balance if you purposely want to make an image look cool or warm, or if you are using artificial lights.

    So be mindful of your white balance; know what it does and how it will impact your images. Then decide how to use it.

    Exposure compensation

    What is exposure compensation?

    Exposure compensation allows you to very quickly add or subtract light from an image.

    Too dark? Use the exposure compensation feature to add a stop of light. Too bright? Exposure compensation can quickly darken the image.

    Aperture Priority mode most often on my camera. So I select the aperture, and the camera decides the shutter speed. If I adjust the exposure compensation, my camera will retain my chosen aperture and simply adjust the shutter speed up or down to get the desired exposure.

    And if I were to use Shutter Priority mode, as I sometimes do, the camera would adjust the aperture, instead.

    (In Auto mode, the camera makes this decision for you.)

    I use exposure compensation constantly. It is my go-to method for fine-tuning my exposures in the field. On my Canon DSLR, I can adjust it with a simple twitch of my thumb on the rear wheel of the camera. Other cameras have their exposure compensation control as a wheel near the shutter button, or as part of a system of buttons on the back.

    Know how your camera works and learn to adjust the exposure compensation quickly and efficiently. Understanding this important tool will mean you don’t miss your chance to get the shot right when you are working in the field or the studio.

    Essential camera settings: Conclusion

    These five camera settings are the most important things to understand about your camera.

    Experiment with them so you know how they affect your final image. Learn to change each setting quickly and without fuss.

    Once you’ve done this, you’ll have taken charge of your photography.

    And you’ll be on your way to creating purposeful images.

    If you have any comments or questions, please add them below!

    The post The Five Most Essential Camera Settings and How to Use Them appeared first on Digital Photography School. It was authored by David Shaw.

    Go to Source

    Leave a Comment

    Your email address will not be published. Required fields are marked *